6.1.5 Facade Elemental Performance

2 minutesread

For Conceptual Models, you may also input values for Walls and Glazing.  As the thermal performance of the Walls or Glazing are improved, the Maximum Allowable Glazing will increase (more is allowed due to the higher performance).

As performance for Glazing and Walls reduce, both Current Façade Performance and Maximum Allowable Glazing Percentage values will also reduce.

By clicking on the down arrow beside the element values for Roofs, Floors, Walls and Glazing, a dial and slider will appear to allow you to adjust the values.

Adjust properties by clicking into the values displayed

Adjusting thermal values for Roofs/Floors/and Glazing will not affect the dials on the Dashboard as these values are not being written to the model.

Adjusting the thermal properties for conceptual walls will affect the U-value or R-value dial on the Dashboard which is the Facade Performance.

Adjusting the U-value for glazing will not affect the Dashboard as glazing specification is defined elsewhere in the application (under the Facades tab).

Adjusting Glazing Percentages will also affect the Dashboard Dial for Percentage Glazing as this is applied to the model.

                                                                                                                                                                                                                                       

0
78
2 minutesread

Related Knowledge Base Posts

Submit

    Type your search string. Minimum 4 characters are required.

    Scroll to Top